What are the extrusion methods of aluminum extrusion machine and how to solve the high oil pressure temperature

In the extrusion machine, there is an aluminum extrusion machine, which, as the name suggests, is a kind of extrusion machine used to produce aluminum profiles, so there will be this specific name. So, since the beginning of the article mentioned, next, may wish to learn, understand and master the professional knowledge of this kind of extrusion machine, so that it can be used correctly and rationally, rather than wrongly.

1. Aluminum extrusion machine, does it have some accessories? And what are the extrusion methods?

Aluminum extrusion machine, its composition, mainly organic base, front column frame, force column, extrusion cylinder, electrical control system of these five. Moreover, it has accessories, such as mold base, thimble, scale plate and skateboard. In the extrusion method, it is specifically for the forward extrusion method, reverse extrusion method, lateral extrusion method, hydrostatic extrusion method and continuous extrusion method these five kinds.

2. What is the forward extrusion method of aluminum extrusion machine?

The forward extrusion method of aluminum extrusion machine, which is from a professional point of view, is for the forward thermal deformation extrusion, through some specific molds, such as flat molds, cone molds and shunt molds, etc., to obtain the required cross-section shape of aluminum profiles. And, this is the common extrusion method of the extruder.

3. Do you have different specifications and sizes for the molds used in the aluminum extrusion press? In addition, what is the standard temperature of its heating furnace?

The mold used by the aluminum extrusion machine has different specifications and sizes, and the corresponding mold specifications and sizes are also different if the tonnage of the extrusion machine is different. Therefore, we should have a correct understanding of the choice can not be wrong. The standard temperature of its heating furnace is 400 to 480 degrees.

4. Is the oil pressure and temperature high when the aluminum extruder extrudes the thin material? How to solve it?

Aluminum extrusion machine, which in the extrusion of thin material, due to the large extrusion pressure, it will make the oil pressure and temperature of the extrusion machine is higher. However, it will have an adverse effect on the extrusion machine itself, and even affect the normal operation of the equipment. Therefore, the oil temperature should be controlled, or the hydraulic pipe should be cooled to avoid problems.